Bathroom & Tanks

Video Walkthrough

Covers the toilet pedal, the bathroom light switch, the tank monitor panel, and the water pump.

Toilet

The bidet is not installed yet. Don't use it.

To use the toilet: press the foot pedal to add a splash of water to the bowl before use, then press it again afterward to flush. Use RV-safe toilet paper only. Regular toilet paper doesn't break down the same way and can clog the black tank.

Shower

Handheld showerhead with a shutoff valve built into the wand. Use it to pause the water while you lather up, since the fresh tank is limited. Shower water drains to the gray tank.

Tank Monitor

Check fresh, gray, and black tank levels, and battery charge, on the monitor panel inside.

Dumping Tanks

The sewer hose is stored in the dedicated compartment on the tongue. Connect it to the sewer inlet on the curb side, then:

1. Open the black valve first and let it run until the water coming out turns clear
2. Close the black valve
3. Open the gray valve. The gray water rinses the hose out after the black tank drains, which is why black always goes first
4. Close both valves before disconnecting
5. Rinse the hose off before stowing it, and use the tank flush connection if there is one to help clear out the black tank

---

Photo suggestion: the tank monitor panel and the sewer hose storage compartment are the two most-asked-about spots, worth a photo each.